DEFENCE OFFSET FACILITATION AGENCY (DOFA)

 

 

Vision Statement  - To  Facilitate Implementation of Offset Policy of the Ministry of Defence.

 

 

 

ROLE 

CHARTER OF DUTIES

ORGANISATION

CONTACT DETAILS

OFFSET PROCEDURE

FIRMS GRANTED INDUSTRIAL LICENCE FOR MANUFACTURE OF DEFENCE PRODUCTS.

FREQUENTLY ASKED QUESTIONS ( FAQs)

 

DPP-2006

DIPP

 

 

 

 

 

                                                 

 

 

 

 

 

 

 

 

 

 

 

 

 

Role

 

DOFA has been established under the Department of Defence Production (DDP) as a single window agency to facilitate implementation of the offset policy of the Ministry of Defence.  DOFA will assist potential vendors in interfacing with the Indian defence industry for identifying potential offset products/projects as well as provide requisite data and information for this purpose.

 

Charter of Duties

 

 

  1. Facilitate implementation of the offset policy.
  2. Assist in vetting of offset proposals technically.
  3. Assist in monitoring the offset provisions.
  4. Suggest improvements in the policy and procedures.
  5. Interact with Headquarters Integrated Defence Staff and Service Headquarters.
  6. Advise, in consultation with the Headquarters Integrated Defence Staff, Services and Defence Research and Development Organisation, areas in which offsets will be preferred.
  7. Promote exports of defence products and services.
  8. Provide advisory clarifications on the policy and procedures (in consultation with the Acquisition Wing wherever necessary).

 

 

Organisation

 

1.       DOFA has been established under the Department of Defence Production (DDP) and functions under the chairmanship of Joint Secretary (Exports).  It is being serviced by the Directorate of Planning & Coordination, in the DDP under Director (Planning & Coordination) who is assisted by Planning Officer (Capital Acquisition Plan), PO (CAP) and Deputy Planning Officer (Capital Acquisition Plan), DPO(CAP).

 

2.       Director (P&C) is the designated officer for interface with Industry and Acquisition Wing.

 

3.       DOFA has been constituted as under :-

 

          (i)      JS (X), Department of Defence Production              Chairman

 

          (ii)     Representatives of three Service HQrs                    Member

                   (Indian Army, Indian Air Force, Indian Navy)

 

          (iii)    Representative of Headquarters Integrated              Member

Defence Staff (HQIDS)                               

                    

          (iv)    Representative of Defence Research &                   Member

Development Organisation (DRDO)                                          

                  

          (v)     Designated officers from Hindustan                           Member

Aeronautics Ltd (HAL), Bharat Electronics Ltd

(BEL), Bharat Earth Movers Ltd(BEML) and

Ordnance Factory Board (OFB)

                   (on a case to case basis)

         

(vi)     Designated person from Confederation                     Member

of Indian Industries (CII) and Federation of

Indian Chambers of Commerce & Industry (FICCI)        

 

          (vii)   Director (P &C)                                                Member Secretary

                                                                                               

 CONTACT DETAILS

 

 

Chairperson                  -     Shri Satyajeet Rajan, JS(X)

                                              Ministry of Defence,

R. No. 135A,South Block,

New Delhi – 110 011

Email ID – jsx@nic.in

 

         Tele Fax  :   011-2301 5505

 

Member Secy                -     Shri Saurabh Kumar, Director(P&C)

                                              Dte of Plg & Coord, DDP

                                              Ministry of Defence

                                              R.No.15, ‘H’ Block, New Delhi – 110 011

         

Tele No       011-2301 1420

          Fax No.       011-2379 3032

 

PO(CAP)                       -       Col K V Kuber,

                                              Dte of Plg & Coord, DDP

                                              Ministry of Defence,

                                              R.No.41, ‘H’ Block, New Delhi – 11

         

Tele No       011-2379 2099

         Fax No.       011-2379 3032

 

DPO(CAP)                    -       Col Ravinder Singh

                                              Dte of Plg & Coord, DDP

Ministry of Defence

                                              R.No.12, ‘H’ Block, New Delhi – 110 011

                                               

Tele No       011-2301 6272

         Fax No.       011-2379 3032

 

Postal Address DOFA         Dte. of Planning & Coordination

                                              Ministry of Defence, Deptt of Defence Production

                                              R.No.15, ‘H’ Block, DHQ PO,

New Delhi – 110 011

 

DOFA's Email address    -    dofa-mod@nic.in

(We encourage questions/doubts on Offset Policy to be sent to us through email)

 

 

 

 

OFFSET PROCEDURE

 

General

 

       Procedure for implementing the Offset provisions was promulgated vide MoD ID No. 81/Director (Acq)/06 dated   10 May 06 and has been duly included as Appendix D to Defence Procurement Procedure (DPP) 2006.

 

Extract of DPP (Para 22).

 

       The offset clause would be applicable for all procurement proposals where indicative cost is above Rs 300 Crores and the schemes are categorized as ‘Buy (Global)’ involving outright purchase from foreign/Indian vendors and ‘Buy and Make with Transfer of Technology’ i.e. Purchase from foreign vendor followed by Licensed Production.

 

Procedure For Implementing Offsets’ Provisions

 

The provisions in the Defence Procurement Procedure (DPP) 2006 concerning offsets will be implemented as per the following procedure. 

 

 

1.        SCOPE

 

1.1         These provisions will apply to all Capital Acquisitions categorized as ‘Buy(Global)’, i.e., Outright Purchase from foreign/Indian vendor, or ‘Buy and Make with Transfer of Technology’, i.e., Purchase from foreign vendor followed by Licensed Production, where the indicative cost in the Request For Proposal (RFP) is Rs 300 crore or more.

 

1.2         Initially, a uniform offset of 30% of the indicative cost of the acquisition in ‘Buy(Global)’ category acquisitions and 30% of the foreign exchange component in ‘Buy and Make’ category acquisitions will be the minimum required value of the offset. Based on a review of the experience of implementing these provisions, the minimum offset percentage for the following two years will be prescribed with the approval of the Defence Acquisition Council.

 

1.3         The DAC may, after due deliberation, also prescribe varying offset percentages above 30% for different classes of cases or for individual cases depending upon the factors involved such as strategic importance of the acquisition or technology, enhanced ability of Indian defence industry to absorb the offset, export potential generated, etc.

 

1.4         These provisions will also apply with appropriate modifications to ‘Buy’ and ‘Buy and Make with TOT’ components for warship construction where the value of individual contracts is Rs 300 crore or more. In such cases, references to the acquisition wing will mean the DDP or shipyard which is building the ship and procuring the system or sub-systems.

 

2.     Defence Offset Obligations

 

2.1         For the purpose of defence purchases made under the DPP 2006, offset obligations shall be discharged directly by any combination of the following methods:

 

(a)                 Direct purchase of, or executing export orders for, defence products and components manufactured by, or services provided by, Indian defence industries, i.e., Defence Public Sector Undertakings, the Ordnance Factory Board, and any private defence industry manufacturing these products or components under an industrial licence granted for such manufacture. For the purpose of defence offset, “services” will mean maintenance, overhaul, upgradation, life extension, engineering, design, testing, defence related software or quality assurance services.

 

(b)          Direct foreign investment in Indian defence industries for industrial infrastructure for services, co-development, joint ventures and co-production of defence products.

 

(c)          Direct foreign investment in Indian organisations engaged in research in defence R & D as certified by Defence Offset Facilitation Agency (DOFA).

 

2.2         The Indian defence industries or organisations concerned are here after referred to as the Indian offset partner.

 

2.3         The offset obligations are to be fulfilled coterminous within the period of the main contract.

 

2.4         All offset offers which satisfy the minimum eligibility conditions will be placed on par and no preference will be given for any extra amount offered.

 

2.5         The advisability of giving additional weights to offers having multiplier effects in terms of exports generated or building indigenous capability in strategic technology products, or other issues may be considered after reviewing the experience of implementing the above policy.

 

3.   Defence Offset Facilitation Agency

 

3.1         The Ministry of Defence will establish a ‘Defence Offset Facilitation Agency’ (DOFA) under the DDP as a single window agency to:

 

(a)         Facilitate implementation of the offsets policy.

 

(b      Assist in vetting offset proposals technically.

 

(c)         Assist in monitoring the offset provisions.

 

(d)        Suggest improvements in the policy and procedures.

 

(e)   Interact with Headquarters Integrated Defence staff and Service Headquarters.

 

(f)            Advise, in consultation with the Headquarters Integrated Defence staff, Services and Defence Research and Development Organisation, areas in which offsets will be preferred.

 

(g)         Promote exports of defence products and services.

 

(h)     Provide advisory clarifications on the policy and procedures (in consultation with the Acquisition wing wherever necessary).

 

3.2         The DOFA will assist potential vendors in interfacing with the Indian defence industry for identifying potential offset products/ projects as well as provide requisite data and information for this purpose. The agency will function under the supervision of a designated Joint Secretary of the Dept of Defence Production, and have representatives from the Service HQrs, HQ IDS, DRDO, DPSUs and OFB as well as from CII, FICCI and ASSOCHAM and other agencies as deemed necessary. DOFA may set up committees and sub groups as considered necessary or based on the inputs received from DRDO.

 

3.3         DOFA may also engage, following a fair, rational and transparent process, reputed independent professional expert bodies, as suggested by DRDO, to assist in its functions and commission studies by such bodies on offset policies, their implementation, utility and impact.

 

4.  Acceptance of Necessity Stage

 

4.1         While being considered by the Services Capital Acquisition Plan Categorization Higher Committee (SCAPCHC), Capital Acquisition Projects of the ‘Buy’ or ‘Buy and Make with TOT’ categories whose indicative cost is Rs 300 crore or more, will be recommended for application of the standard 30% offset clause. However, based on detailed examination of the capability of the defence industry to absorb the offset value available and its strategic importance, the SCAPCHC may recommend increased offset percentages in selected cases. The DOFA may also advise on areas where offsets will be preferred.

 

4.2       The DAC will consider the recommendations and take the final decision.

 

4.3       This offset condition will form a part of the RFP and, subsequently, of the contract.

 

5.  Solicitation of Offers

 

5.1         Para 26 read with Schedule I of DPP 2006 prescribes the standardised RFP document. Para 6 of the RFP format will apply wherever offsets are attracted. In order that the secrecy of the commercial bid is maintained, the vendor is only required to give a written undertaking to the effect that it will meet the offset obligation laid down in the RFP. This undertaking in the format at Appendix A to these guidelines will be included in the envelope containing the vendor’s technical offer. It will be binding on the vendor and will clearly state that failure at any stage, on the part of the vendor to meet the offset obligation specified in the RFP at any stage will disqualify the vendor from any further participation in the contract and render its offer as null and void.

 

5.2    The technical and commercial offset offers would have to be submitted by the vendors by a date to be specified in the RFP, which would be not earlier than three months from the date of submission of the initial technical and commercial offers.  These offset offers would have to be submitted together in two separate sealed covers to the Technical Managers.

 

6.   Technical Evaluation of Offset Offers

 

6.1       The technical offset offer would contain details of the products, services and investment proposals indicating relative percentages, proposed Indian partners for offset investment and other relevant information in the format given at Appendix B.  The commercial values of the offset proposals are not to be indicated in this technical offset offer.

 

6.2         The technical offset offers would be scrutinised by a Committee to be constituted by the concerned Technical Manager of the Acquisition Wing, with the prior approval of Director General (Acquisition).  The Committee may include representatives of the Services, Defence Finance and DRDO.  DOFA will assist the Committee in the scrutiny by providing information as to the technical feasibility of the offset offer, in terms of capability of the Indian Offset Partner for supplying the products or services required within the stipulated time frame.  The Committee may also incorporate experts as identified by the DRDO for scrutinising the technical offset offers.  This Committee will examine the technical offset offers and shortlist the vendors meeting the offset obligations.  The Technical Mangers will process the report of this Committee for approval by the Director General (Acquisition).

 

6.3       The vendor will be free to select the Indian offset partner for implementing the offset requirement.

 

6.4       Only contracts for export of defence products or services or investment made after the signing of the main contract will be reckoned for discharging offset obligations. For products which contain imported components, only the value addition in India will count towards offset obligations.

 

6.5         For `Buy (Global)’ category procurements, where offset is applicable if an Indian firm is bidding for the proposal and is offering an indigenously developed product, then for such a case offset would not be applicable.  However, to ensure that the offset obligation is not circumvented by Joint Ventures (of Indian and foreign firms) where Indian firm is bidding, the foreign firm concerned will have to discharge offset obligation as per the RFP requirement.

 

7.  Commercial Offset Offers

 

7.1         The Commercial Offset Offer, format in Appendix C, will contain the detailed offer specifying the absolute amount of the offset with a break up of the details, phasing, Indian partner etc.

 

7.2         The model formats at Appendix B and Appendix C may be amended by the vendor without however deviating from the mandatory offset requirements prescribed.

 

 

8.  Examination of Offset Offers

 

8.1         The offset offer will be examined in two stages by the Acquisition Wing. In the first stage, the first part of the offset offer (refer Para 6.1 and 6.2 above) will be examined to ensure that the offset offer fulfils the mandatory requirements and thereby qualifies the vendor for opening of its commercial offset bid.

 

8.2    These commercial offset offers would be opened along with the main commercial offer. The Contract Negotiating Committee (CNC) would verify that the Commercial Offset Offers meet the stipulated offset obligations. The CNC will be advised by an official representative of DOFA(government/DPSU/OFB or as deemed necessary) on offset matters, whenever required.

 

8.3  The Commercial Offset Offer Would have no bearing on the determination of the L1 vendor. After the CNC is satisfied that the offset offer is in accordance with the prescribed norms, the L1 vendor will be invited to sign the main contract and the offset contract.

 

9.  Contents of an Offset Contract

 

9.1    A model Offset Contract is placed at Appendix D. It may be varied depending upon the facts and circumstances of each case.

 

9.2    The offset contract is to be signed simultaneously with the main contract. The vendor will not under any circumstances delay the execution of the main contract on the plea of failure of Indian defence industry to execute various offset contracts.

 

10.       Monitoring Implementation of the Offset Contract

 

10.1       The vendor will submit quarterly reports in the format in Appendix E on implementing the offset contract to the Acquisition Manager concerned. The DOFA will assist the Acquisition Manager concerned in the Acquisition Wing in monitoring the implementation of the offset contract. Where necessary, an audit by a nominated official or agency may be conducted to confirm the actual status of implementation.

 

10.2        A vendor may, giving reasons, request re-phasing of the offset obligations within the period of the main contract. Director General may allow the request if the reasons are considered justified.

 

10.3        Any request on exceptional grounds for extension of the period of the offset contract beyond the period of the main contract will be examined by the Acquisition Wing and placed before the Defence Procurement Board for decision. Requests for any further extensions will be decided by the Defence Acquisition Council.

 

10.4        If a vendor fails to fulfil the offset obligation in a particular year, a penalty equivalent to the unperformed offset obligation will be levied. 5% of the value of the unfulfilled portion of the annual offset obligation will be paid as penalty or recovered from the bank guarantee of the main contract, subject to replenishment, or deducted from the amount payable under the main contract, and the unfulfilled offset value will be carried forward to the subsequent year.

 

10.5        Any vendor failing to implement the full offset obligations during the period of the main contract, or during the period duly extended, will be liable to be disqualified for participation in future defence contracts. The disqualification will be decided by the Acquisition Wing after giving an opportunity to the vendor to explain the reasons.

 

10.6              Any differences or disputes will be settled through discussions. The decision of the Acquisition Wing will be final. The provisions in the main contract regarding arbitration will apply to the offset contract also.


                  Appendix  A

(Refers to para 5.1)

 

 

 

UNDERTAKING TO COMPLY WITH OFFSET REQUIREMENTS

 

 

 

1.    The Bidder -------------(name of the company) hereby

 

(i)           undertakes to fulfil the offset obligation as laid down in the Request For Proposals.

 

(ii)         undertakes to ensure timely adherence to fulfilment of offset obligations.

 

(iii)      accepts that any failure on the part of the Company to meet offset obligations will render disqualification from any further participation in the contract and render ibid offer as null and void.

 

(iv)        undertakes to furnish technical details of offset obligations indicating products and services and corresponding Indian Industry partner(s) for the same when so required to by Ministry of Defence, Government of India, after being found to satisfy the SQRs.

 

(v)        undertakes to translate the detailed technical offset offer given at para (iv) above into a business implementation plan now furnishing complete commercial details of investments, products and services, Indian Industry partners, amount, phases and time plan for the same in the form of a commercial offset offer as and when so required to by MOD, GOI.

 

 

 

 

 

 

       

               Appendix  B

                                                                                          (Refers to para 6.1)

 

 

 

TECHNICAL OFFSET OFFER

 

 

1.         The Bidder ------------(name of the company) hereby offers the following Direct Foreign Investment(DFI), products and services with Indian Industry partners in compliance to the technical offset obligations in the RFP.

 

2.         The Bidder hereby also furnishes MoU with Indian Industry partners for the proposed investments, products and services.

 

 

OFFER LIST OF PRODUCTS AND SERVICES

 

S.No.

DFI, Products & Services

Indian Offset Partner

Percentage Cost of Offset Obligation

MoU

(If Applicable)

Remarks

1.

DFI/Products / services1

Indian offset Partner 1

Percentage

Memorandum1

 

2.

DFI/Products / services2

Indian offset Partner 2

Percentage

Memorandum2

 

3.

Similarly for all

 

 

 

 

 

 

 


     Appendix  C

(Refers to para 7.1)

 

 

                           COMMERCIAL OFFSET OFFER

 

 

1.         In compliance with the offset obligations in the RFP, the Bidder _____ hereby offers following products and services with Indian Industry partners.

 

2.         The Bidder hereby also furnishes MoU(s) with Indian offset partners for applicable investments, products and services.

 

OFFER LIST OF PRODUCTS AND SERVICES

 

S.No

DFI, Products & Services

Indian Offset Partner

Value (with time frame break up)

Time Frame

(break up)

Remarks

1.

DFI, Products & Services 1

Indian Offset Partner 1

 

 

 

2.

DFI, Products & Services 2

Indian Offset Partner 2

 

 

 

3.

Similarly for all

 

 

 

 

 

3.         Details of Foreign Direct Investment/Joint Venture/Co Development/ToT – Give Details

 

4.         Any other contracts with anyone in India – Give Details

 


 

     Appendix D

    (Refers to para 9.1)

 

 

OFFSET CONTRACT

 

 

Contract No. ___

 

Dated ____________

 

This Offset Contract entered into this date of ________________ hereinafter refer to as “Effective Date”, is by and between

 

(a)        The President of India represented by the Joint Secretary and Acquisition Manager (Land systems,) Ministry of Defence, Government of India, New Delhi, hereinafter referred to as the Buyer on one part and

 

(b)        M/s (Name of the Vendor) duly represented by ________________ _______________ and incorporated under the laws of ________________ having its registered office at _______, hereinafter referred to as “Seller” on the other part. 

 

Whereas, the Seller has been awarded a Contract, Contract Number _________ dated _______________________for the Project entitled ‘_______________________’, as the Supply Contract stipulates a total amount of ____________________to be paid by the Buyer for the provision of the seller’s goods and/or services and

 

WHEREAS, the Seller clearly understands and agrees to the Offset Clause given in the RFP and the offset schedule defined in the Defence Procurement Procedure 2006 and the offset policy promulgated by the Government of India, referred to as the “ Offset Policy”.

 

Now, therefore, the Buyer and the Seller agree as follows: -

 

(1)        The Seller understands and agrees that supply contract is subject to fulfilment of the offset contract/contracts that the seller will execute with the Indian offset partner/partners towards the complete fulfilment of Offset Obligations laid down in the RFP.  The total amount this Offset Obligation is ______________ which is thirty percent (30%) of the supply contract value.

 

(2)        In the event that the supply contract value is increased or reduced then the Seller’s Offset Obligations shall be adjusted proportionately.

 

(3)        The Offset start date applicable to the Offset Obligations hereunder shall be the effective date of contract number __________.

 

(4)        Furthermore, the Seller agrees and promises to perform its Offset Obligation in accordance with the Offset Schedule of the commercial offset offer. The Offset Schedule may not be changed or amended in any way without the prior written agreement of the MoD, Govt of India.

 

(5)        Within Sixty(60 calendar days from the Effective Date of this agreement, the Seller shall, in writing, provide the Ministry of Defence a list of the Company’s Official Contacts for all matters related to this agreement and the performance of the Seller’s Offset Obligation. The list shall specify the name, mailing address, street address, telephone, and facsimile numbers of each Official Contact and shall be limited to three (3) Official Contacts.  Any and all communications and correspondence by the Ministry of Defence to any one (1) of the said Official Contacts shall be deemed as if by the Ministry of Defence to the Seller.

 

(6)        In the event of force majeure, the DOFA and the Seller’s official representative will meet to assess progress to date under the program prior to the date of the force majeure event and to determine a mutually agreeable manner and schedule for the fulfilment of the Seller’s remaining Offset Obligation.

 

(7)        This Contract, and any and all matters relating to the fulfilment of the Seller’s Offset Obligations and performance under the Programme shall be interpreted and be subject to the Laws of the Republic of India.  This contract shall be governed by and interpreted in accordance with the laws of the Republic of India.

 

(8)        The Contract may only be amended, supplemented, modified or terminated by written mutual agreement of the Ministry of Defence and the Seller.  This Contract shall expire upon fulfilment of the Company’s Offset Obligations in accordance with the Contract.


 

Appendix E

(Refers to para 10.1)

 

QUARTERLY REPORT ON FULFILLING OFFSET OBLIGATIONS

 

REPORT FOR QUARTER ENDING  ------------

 

1.      MAIN CONTRACT NO AND EFFECTIVE DATE ---

2.      INDIAN OFFSET PARTNER -------

3.      OFFSET CONTRACT NUMBER    ----

4.      PRODUCT NUMBER AND NAME

5.      SCHEDULE OF OFFSET OBLIGATIONS AND FULFILMENT

 

NO

 

 

 

(1)

DFI/ PRODUCTS/ SERVICES OFFERED

(2)

VALUE OF OFFSET COMMITTED

 

(3)

DATE BY WHICH TO BE FULFILLED

 

        (4)

ACTUAL VALUE FULFILLED BY REPORTING DATE

(5)

REMARKS INCLUDING

PENALTIES IF ANY

     (6)

 

 

 

 

 

 

 

  

.

 

 

 

 

 

6.      EXPLANATORY NOTES, IF ANY

7.      SUPPORTING ENCLOSURES WITH RESPECT TO COLUMN 5 ABOVE FOR                ACTUAL VALUE FULFILLED

 

 

 

 

             Sd/-

 

 

 

 

 

 

 

 

Sd/-

 

(Authorised Representative

of Indian offset partner)

(Authorised Representative

of Buyer)

 

 

 

 

 

 Extract of Request for Proposal (RFP)[ Page 47 Para 6 of DPP 2006]

 

Offset (If applicable).    The vendor has to undertake Offset contracts amounting to _______% ( as approved by the DAC) of the value of the commercial proposal.  The technical offer should include a written undertaking to this effect.  Failure to discharge this undertaking at any stage will result in disqualification of the vendor from further participation in the evaluation process and the offer will be treated as null and void.  The terms and conditions of Offset are given at Appendix K to this RFP. (The procedure for implementation of the offset obligation is placed at Appendix D to Chapter I of DPP- 2006, which is at www.mod.nic.in.

 

 

LIST OF LETTERS OF INTENTS/INDUSTRIAL LICENSES ISSUED TO PRIVATE COMPANIES FOR THE MANUFACTURE OF ARMS AND ARMAMENT

(As on 09.11.2011)

 

 

Sl. NO.

 

NAME OF THE COMPANY

&

LOI/IL NO. AND DATE

 

ITEM OF MANUFACTURE

1

M/S RAMOSS INDIA ,

LI: 75(2002)

Dt. 12.12.2002

BULLET PROOF VESTS, JACKETS, OTHER TYPES OF BODY ARMOUR, BULLET PROOFING VEHICLES AND VEHICLE SAFETY FITMENTS.

 

2

M/S LARSEN & TOUBRO LTD.,

NEW DELHI

LI:54(2002)

Dt.20.8.2002

CIL:11(2007)

Dt 31.07.2007

DESIGN, DEVELOPMENT, MANUFACTURE AND ASSEMBLY OF ARMOURED AND OTHER COMBAT VEHICLES INCLUDING ASSOCIATED SYSTEMS AND SUB-SYSTEMS SUCH AS TURRETS, TURRET MOUNTS, BRIDGE LAYING SYSTEMS ON TANKS ETC.

 

3

M/S LARSEN & TOUBRO LTD.,

LI:51(2002)

Dt.:20.8.2002

CIL:6(2007)

Dt 27.06.2007

WARSHIPS

SUBMARINES

WEAPON PLATFORMS

HIGH SPEED BOATS/CRAFTS

4

M/S LARSEN & TOUBRO LTD.

LI:52(2002)

Dt.20.8.2002

CIL:7(2007)

Dt. 27.06.2007

DESIGN, DEVELOPMENT AND MANUFACTURE OF RADAR, SONAR SYSTEMS AND ASSOCIATED SUB-SYSTEMS, ELECTRONIC WARFARE EQUIPMENT AND SYSTEMS SENSORS .

 

5

M/S LARSEN & TOUBRO LTD.

LI:53(2002)

Dt. 20.8.2002

CIL:10(2007)

Dt. 31.07.2007

DESIGN, DEVELOPMENT AND MANUFACTURE OF ARMS AND ARMAMENTS INCLUDING

  1. WEAPON LAUNCHERS AND LAUNCH SYSTEMS  - LAND, SHIP AND AIRBORNE PLATFORM BASED – INCLUDING THEIR SUB-SYSTEMS
  2. MANUFACTURE AND ASSEMBLY AND TESTING OF MORTARS, FIELD GUNS, AIR DEFENCE GUNS, ANTI-TANK WEAPONS SYSTEMS ETC. INCLUDING ASSOCIATED SYSTEMS AND SUB-SYSTEMS

ARMAMENT INCLUDING AMMUNITION/ORDINANCE LIKE MISSILES, ROCKETS, TORPEDO, LAND/NAVAL MINES, DEPTH CHARGES, INCLUDING ASSOCIATED SYSTEMS AND SUB-SYSTEMS.

6

M/S MAX AEROSPACE AND AVIATION LTD.

LI:38(2003)

Dt. 23.4.2003

CIL:9(2006)            

Dt. 06.09.2006

AVIONICS

MILITARY AIRCRAFT NAMELY (I) UNMANNED AERIAL VEHICLE(UAV) AND UNMANNED COMBAT AERIAL VEHICLE(UCAV)(II) INSTALLATION/MANUFACTURE & ASSEMBLY OF AIRCRAFT SUBSYSTEMS (III) ASSEMBLY OF HELICOPTERS

ARMS AND AMMUNITION, VIZ, (I) 9MM WEAPON SYSTEMS INCLUDING PISTOLS, CABINES RIFLES AND ACCESSORIES,(II) AMMUNITION OF THE ABOVE WEAPON SYSTEMS

7

M/S ANJANI TECHNOPLAST LTD LI:50(2003)

Dt. 5.6.2003

CIL:3(2006)

Dt. 12.05.2006

SAFETY AND BALLISTIC PRODUCTS INCLUDING BULLET PROOF VESTS, JACKETS, HELMETS AND PODIUMS ETC.

 

8

M/S  LARSEN & TOUBRO LTD.

LI:75(2003)

DT.:29.8.2003

CIL:12(2007)

DT 31.07.2007

DESIGN, DEVELOPMENT AND MANUFACTURE OF AIRBORNE ASSEMBLIES, SYSTEMS AND EQUIPMENT FOR AIRCRAFTS, HELICOPTERS AND UNINHABITED AERIAL VEHICLES & EQUIPMENT FOR THE AVIATION SECTOR.

 

9

M/S MAHINDRA & MAHINDRA LTD.

LI:73(2003)

CIL:07(2008)

Dt.:28.8.2003

MILITARY SIMULATORS FOR WEAPONS, VEHICLES, AIRCRAFTS AND SHIPS FOR TRAINING PURPOSES

10

M/S TIL LTD

LI:74(2003)

Dt. 28.8.2003

CIL:21(2005)

Dt 30.08.2005

 MOBILE LAUNCHERS, MAST MOBILE AERIAL SYSTEM AND SPECIAL PURPOSE LOGISTIC VEHICLE & EQUIPMENTS.

11

M/S SOUTHERN GROUP INDUSTRIES (P) LTD.

LI:76(2003)

Dt. 3.9.2003

1. A) BULLET PROOF JACKETS/VESTS

     B) BULLET PROOF HELMETS/PATKAS

2. BULLET PROOFING  VEHICLES/CONTAINERS/

    CABINS/AIRCRAFTS

3.  NBC PROTECTIVE PRODUCTS – SUCH AS SUITS, GLOVES, MASKS, TENTS ETC.

4. ECC PROTECTIVE GEAR AND EQUIPMENTS.

5.  CAMOUFLAGE PRODUCTS (SUCH AS BATTLE SUITS, MASKS, COVERALLS)

6. BOMB DISPOSAL SUITS AND BLANKETS

 

12

M/S AUTOMOTIVE COACHES & COMPONENTS LTD.

LI:87(2003)

Dt.13.10.2003

CIL: 3(2010)

Dt. 25.10.2010

LIGHT ARMOURED MULTIROLE VEHICLES

13

M/S HBL NIFE POWER SYSTEMS LTD.

LI:86(2003)

DT.:13.10.2003

ELECTRONIC RADARS AND PARTS THEREOF

14

M/S ELECTRONICS CORPORATION OF INDIA  LIMITED

CIL:6(2004)            

Dt. 27.11.2004

ELECTRONIC EQUIPMENT OF SPECIAL KIND FOR DEFENCE LIKE FUZES

15

M/S TATA MOTORS LTD.

IL: 13(2004)

Dt. 23.3.2004

 

  1. LIGHT ARMOURED MULTI ROLE VEHICLES
  2. ARMOURED ENGINEER VEHICLES,
  3.  ARMOURED RECOVERY VEHICLES
  4.  ARMOURED LOGISTICS CARRIERS
  5.  HEAVY TANK TRANSPORTERS
  6. SHELTERS AND CONTAINERS
  7.  SPECIAL ATTACK AND SURVEILLANCE VEHICLES
  8.  TACTICAL FLOATING BRIDGES AND FERRIES
  9.  TRACKED ARMOURED VEHICLES
  10.  BULLET PROOF CARS, JEEPS AND TROOP CARRIERS
  11.  HIGH MOBILITY VEHICLES
  12.  MECHANISED MATERIAL HANDLING AND BRIDGING EQUIPMENT
  13.  MINE PROTECTED VEHICLES.

16

M/S BHARAT ELECTRONICS LTD

DIL:23(2004)          

Dt. 08.06.2004

LOW LEVEL TRANSPORTABLE RADAR

17

M/S B.F. UTILITIES LTD.

DIL:44(2004)

Dt. 8.9.2004

(A) ARMS AND AMMUNITION BOTH CONVENTIONAL AND GUIDED (SMART AMMUNITION) (I) READY TO USE SHELLS AND ANTI TANK SHOTS IN 105-155 MM RANGE (II) READY TO USE MORTARS 120 MM LONG RANGE

(B) WEAPONS & WEAPON LAUNCHERS (I) READY TO USE MULTI BARREL ROCKETS LIKE 12 MM GRAD & PINAKA AND UPTO 300 MM CALIBER

(C) READY TO  USE HIGHER CALIBER GUNS BY UPGUNNING OF LOWER CALIBER GUNS.

18

M/S B.F. UTILITIES LTD.

DIL:48(2004)

Dt.16.9.2004

ARMOURED PERSONNEL CARRIERS BOTH TRACKED AND WHEELED WITH RELEVANT SYSTEMS, SUB-SYSTEMS AND FITMENTS

19

M/S BHARAT ELECTRONICS LTD

DIL:49(2004)          

Dt. 29.11.2004

1.      ENHANCED TACTICAL COMPUTER

2.      WIRELESS LOCAL AREA NETWORK

20

M/S MAHINDRA & MAHINDRA LTD.

DIL:61(2004)

Dt.21.12.2004.

SEA MINES AND ITS VARIANTS

21.

M/S TSL DEFENCE TECHNOLOGIES PVT. LTD.

DIL:34(2004)

Dt.21.12.2004.

 

DESIGN, DEVELOPMENT AND MANUFACTURE OF CHAFF DISPENSER AND MINI-UAVS & ASSOCIATED SYSTEMS.

22.

 

M/S VECTRA ENGG. MATRIALS PVT LTD.

DIL: 1(2005)

Dt.18.01.2005

 

4X4 LIGHT ARMOURED MULTI-UTILITY VEHICLE AND LIGHT RECOVERY VEHICLE SUPERSTRUCTURE.

 

23.

 

 

M/S MAHINDRA & MAHINDRA LTD.

DIL:8(2005)

Dt.25.2.2005.

 

5.56 MM CARBINE

 

24.

 

 

M/S BHARAT EARTH MOVERS LTD

CIL:22(2005)

Dt. 01.09.2005

ARMOURED RECOVERY VEHICLE

 

 

 

25.

M/S RMX BRIDPORT DEFENCE SYSTEMS PVT. LTD

DIL: 50 (2005)

Dt.01.08.2005

 

MULTI SPECTRAL CAMOUFLAGE NETS (MSCN)

 

26.

M/S IST LTD

DIL: 99(2005)

Dt.24.11.2005

 

1. FUZES

2. NIGHT VISION DEVICES AND SENSOR BASED SYSTEMS

 

27.

M/S ALPHA-ITL ELECTRO OPTICS PRIVATE LTD.

DIL: 100 (2005)

Dt.25.11. 2005

 

OPTICAL GOODS AND EQUIPMENT/OPTICAL INSTRUMENTS, VIZ. NIGHT VISION BINOCULARS (NCROS),
MONOCULAR NIGHT VISION DEVICES (MINI NSEAS), REFLEX SIGHTS (SUCH AS MARS), AIMING DEVICES (SUCH AS AIM I/C, I/V)

 

 

28.

M/S VXL TECHNOLOGIES LTD.

DIL: 102 (2005)

Dt.28.11.2005

 

VARIOUS SAFETY FUZES AND DEVICES {WITH OR WITHOUT EXPLOSIVE FILLING}

 

29.

M/S MEMORY ELECTRONICS PRIVATE LIMITED

DIL: 103 (2005)

Dt.28.11.2005

I)     RADIO AND SATELLITE COMMUNICATION EQUIPMENT

II)    INFORMATION TECHNOLOGY SYSTEMS

III)  SIMULATORS

IV)  OPRTRONICS AND ELECTRO OPTRONICS SYSTEMS

V)   ELECTRONIC FUSES

VI)  EARLY WARNING SYSTEMS

 

 

30.

M/S ANJANI TECHNOPLAST LTD.,

DIL:73(2006)

Dt. 12.09.2006

 

SAFETY SECURITY AND BALLISTIC PROTECTION PRODUCTS VIZ. BULLET PROOF JACKETS, VESTS, HELMETS AND PODIUMS ETC.

 

31.

M/S INDTECH CONSTRUCTION PVT. LTD.

DIL:74(2006)

 Dt.04.10.2006

 

SMALL ARMS & AMMUNITION VIZ. 5.56 MM, 7.62 MM, 9 MM, 12.7 MM & 14.5 MM CALIBERS ONLY.

 

32

M/S TATA POWER COMPANY LTD.

DIL: 78(2006)

Dt.29.11.2006

DESIGN, DEVELOPMENT, MANUFACTURE, ASSEMBLY AND UPGRADES OF AVIONICS, AIRBORNE ASSEMBLIES SYSTEMS AND EQUIPMENT FOR AIRCRAFT, HELICOPTERS & AWACS INCLUDING DEVELOPMENT OF UAVS(UNMANNED AERIAL VEHICLES), UVS(UNMANNER VEHICLES) OF ALL TYPES AND FOR ALL USAGES INCLUDING DEFENCE AND CIVILIAN SPACE SYSTEMS/SUB SYSTEMS & ASSOCIATED SYSTEMS.

 

 

33

M/S TATA POWER COMPANY LTD.

DIL: 79(2006)

Dt.29.11.2006

DESIGN, DEVELOPMENT, MANUFACTURE, ASSEMBLY AND UPGRADES OF ELECTRONIC WARFARE SYSTEM (STAND ALONE & INTEGRATED) FOR ARMY, NAVY, AIR FORCE, PARA-MILITARY AND INLAND SECURITY.

 

 

34

M/S TATA POWER COMPANY LTD.

DIL: 80(2006)

Dt.29.11.2006

DESIGN, DEVELOPMENT, MANUFACTURE, ASSEMBLY/SYSTEM INTEGRATION OF STATE-OF-THE-ART NETWORK CENTRIC WARFARE ENABLERS INCL. TACTICAL AND STRATEGIC COMMUNICATION SYSTEMS, BOTH SHORT AND LONG RANGE, DEVELOPMENT OF SPECIALISED ANTENNAS AND MASTS, SOFTWARE DEFINED RADIO, GIMBALS PAYLOAD, SATELLITE/WIRELESS/OPTICAL COMMUNICATION SYSTEMS OTHER COMPONENTS, SUB-SYSTEMS AND ASSOCIATED SYSTEMS.  RUGGEDISATION OF COTS AND SPECIALISED SOFTWARE FOR NETWORK MANAGEMENT, MONITORING AND SECURITY, INTEGRATED GIS WITH COMMUNICATION AND NAVIGATION SYSTEMS FOR DEFENCE AND CIVILIAN APPLICATION, GLOBAL POSITIONING SYSTEMS AND GPS BASED VEHICLE NAVIGATION AND TRACKING SYSTEMS ETC.

 

 

35

M/S TATA POWER COMPANY LTD.

DIL: 81(2006)

Dt.29.11.2006

DESIGN, DEVELOPMENT, MANUFACTURE, ASSEMBLY AND UPGRADES OF WEAPON SYSTEMS, ROCKET & MISSILE LAUNCHERS FOR GROUND AND NAVAL APPLICATIONS INCLUDING ASSOCIATED SYSTEMS & SUB-SYSTEMS INCLUDING INERTIAL & GPS BASED NAVIGATION AND TRACKING SYSTEMS.

 

 

36

M/S TATA POWER COMPANY LTD.

DIL: 82(2006)

Dt.29.11.2006

 

DESIGN, DEVELOPMENT, MANUFACTURE, ASSEMBLY AND UPGRADES OF AIR DEFENCE GUNS/FIELD ARTILLERY, NAVAL GUNS, TANKS COMBAT VEHICLES, ANTI TANK WEAPONS SYSTEMS, MORTARS, SHELL. MISSILES, ROCKETS ANY ASSOCIATED SYSTEMS, SUB-SYSTEMS BUT NOT LIMITED TO TRAJECTORY CORRECTION SYSTEMS, GUIDED MUNITIONS/TORPEDOES

 

 

37

M/S TATA POWER COMPANY LTD.

DIL: 83(2006)

Dt.29.11.2006

DESIGN, DEVELOPMENT, MANUFACTURE, ASSEMBLY AND UPGRADES OF NAVAL COMBAT, AIR DEFENCE, ARTILLERY, COMMAND & CONTROL SYSTEMS, BORDER SECURITY & SURVEILLANCE, INCLUDING SENSORS VIZ. RADARS, SONAR THERMAL IMAGING RADIOGRAPHY, OPTRONICS & NIGHT VISION SUB-SYSTEMS AND ASSOCIATED SYSTEMS.

 

 

38

M/S TATA POWER COMPANY LTD.

DIL: 84(2006)

Dt.29.11.2006

 

DESIGN, DEVELOPMENT, MANUFACTURE AND UPGRADES OF MIL(MILITARY GRADE) PRODUCTS-DISPLAY CONSOLES, RUGGED, COMPUTERS, WORKSTATIONS SERVERS, ON-BOARD COMPUTERS, GPS RECEIVERS, PRINTERS, DOCUMENT/BIOMETRIC SECURITY SYSTEMS ETC.

 

 

39

M/S ALPHA DESIGN TECHNOLOGIES PVT. LTD.

DIL:1(2007)

Dt. 05.03.2007

 

  1. RADAR SYSTEM, PARTS AND ACCESSORIES VIZ. RADAR SYSTEMS AND PARTS VIZ. GROUND BASED, AIR BORNE AND NAVAL RADARS, THEIR UPGRADES AND THEIR COMPONENTS/SUB-SYSTEMS.
  2. OPTICAL GOODS AND EQUIPMENT VIZ. OPTICAL AND OPTO-ELECTRONIC EQUIPMENT AND COMPONENTS SUCH AS DAY/NIGHT VISION BINOCULARS AND GOGGLES, RIFLE SIGHTS, REFLEX SIGHTS, THERMAL IMAGING SYSTEMS, COMPONENTS, PARTS, ASSEMBLIES & SUB-ASSEMBLES FOR THE ABOVE
  3. NAVIGATIONAL INSTRUMENTS VIZ. LASER RANGE FINDER, AIRBORNE, SHIP BORNE AND LAND NAVIGATIONAL SYSTEMS
  4. COMPUTER AND COMPUTER BASED SYSTEMS AND PARTS THEREOF VIZ. SIMULATORS, PARTS AND ACCESSORIES FOR VARIOUS SIMULATORS
  5. TRANSMISSION APPARATUS FOR RADIO TELEPHONY & RADIO TELEGRAPHY VIZ. TACTICAL COMMUNICATION SYSTEMS, UNIVERSAL(DIGITAL) CONTROL HARNESS FOR COMMUNICATION EQUIPMENT, HF/VHF/UHF & MICROWAVE COMMUNICATION EQUIPMENT/SYSTEMS, AIRBORNE/GROUND/SHIP BASED ELECTRONIC WARFARE EQUIPMENT, C31, C41 SYSTEMS

 

  1. REPAIR AND MAINTENANCE OF COMPUTERS AND COMPUTERS ABASED SYSTEMS VIZ. REPAIR AND MAINTENANCE OF SIMULATORS INCLUDING INSTALLATION AND COMMISSIONING OF THE SYSTEMS, ANNUAL MAINTENANCE CONTRACTS FOR SIMULATORS

 

  1. REPAIR OF RADAR APPARATUS VIZ. PROVIDING WARRANTY SUPPORT AND CARRYING OUT REPAIR OF AIRBORNE, SHIPBORNE AND GROUND BASED RADAR EQUIPMENT (WHICH SHALL INCLUDE INSTALLATION AND COMMISSIONING SUPPORT ALSO), ANNUAL MAINTENANCE CONTRACTS FOR VARIOUS RADAR APPARATUS.  

 

40

M/S ASTRA MICROWAVE PRODUCTS LTD.

DIL: 26(2007)

Dt. 28.6.2007

MICROWAVE SUB-SYSTEMS AND COMPONENTS FOR WIRELESS COMMUNICATIONS

 

41

M/S JUPITER STRATEGIC TECHNOLOGIES PVT. LTD(NOW M/S AXIS AEROSPACE & TECHNOLOGIES PVT LTD)

DIL: 27(2007)

Dt.28.6.2007

(A) ELECTRONIC WARFARE SYSTEMS (B) COMMUNICATION SYSTEMS (C) RADAR AND AVIONICS SYSTEMS (D) COMMAND AND CONTROL SYSTEMS (E) SURVEILLANCE AND ACCESS CONTROL SYSTEMS.

 

 

42

M/S VEM TECHNOLOGIES PVT. LTD.

DIL: 29(2007)

Dt. 30.7.2007

 

GUIDANCE AND CONTROL SYSTEMS, ELECTRONICS, AVIONICS AND POWER SUPPLIES FOR ROCKETS AND MISSILES.

 

43

M/S VEM TECHNOLOGIES PVT. LTD.

DIL: 30(2007)

Dt. 30.7.2007

 

ARMAMENT ELECTRONICS, SAFETY SYSTEMS AND POWER SUPPLIES.

 

44

M/S DATA PATTERNS (INDIA) PVT. LTD.

DIL: 31 (2007)

Dt. 30.7.2007

 

DESIGN DEVELOPMENT AND MANUFACTURE OF AVIONICS AND ELECTRONIC SYSTEMS FOR AIRBORNE APPLICATIONS SUCH AS FLIGHT CONTROL COMPUTERS, DISPLAYS  ETC., INCLUDING UPGRADES.

 

45

M/S ZEN  TECHNOLOGIES LTD.,

DIL: 32(2007)

Dt. 31.7.2007

 

  1. GRIPPEN FLIGHT SIMULATOR
  2. T-90 GUNNERY SIMULATOR
  3. VOLVO TRUCK SIMULATOR
  4. JAVELIN MISSILE SIMULATOR
  5. INFANTRY WEAPON EFFECTS SIMULATOR (LIVE)

 

46

M/S HBL POWER SYSTEMS LTD.

DIL: 33(2007)

Dt.. 31.7.2007

 

NIGHT VISION DEVICES, IMAGE INTENSIFIERS, THERMAL IMAGERS AND PARTS THEREOF.

 

47

M/S EON INFOTECH LTD.,

DIL:  34(2007)

Dt.  31.7.2007

COMPUTER BASED FIRE CONTROL SYSTEMS, COMMAND & CONTROL SYSTEMS, ELECTRONIC WARFARE SYSTEMS, GPS BASED LOCATION TRACKING SYSTEMS, RF & CELLPHONE JAMMERS.

 

 

48

M/S PUNJ LLYOD LTD.,

DIL: 35(2007)

Dt. 11.9.2007

 

GUN, ROCKET AND MISSILE ARTILLERY SYSTEMS AND RELATED EQUIPMENT

 

ELECTRO OPTICAL SYSTEMS, FIRE CONTROL SYSTEMS AND POWER PACKS ASSOCIATED WITH ARMOURED FIGHTING VEHICLE

 

49

M/S ALLEN REINFORCED PLASTICS (P) LTD.,

DIL: 36(2007)

Dt. 11.9.2007

 

  1. UNDERWATER/SEA MINES
  2. SEA VEHICLES
  3. RADOMES

 

50

M/S DATA PATTERNS (INDIA) PVT. LTD.,

DIL: 37(2007)

Dt. 11.9.2007

 

DESIGN, DEVELOPMENT & MANUFACTURE OF AUTOMATIC TEST EQUIPMENT INCLUDING UPGRADES.

 

 

                    

 

51

M/S BHARAT HEAVY ELECTRICALS LTD.,

DIL: 39(2007)

Dt. 11.9.2007

 

UNDERWATER WEAPON SYSTEMS & CONTROLS AND  ITS COMPONENTS.

 

52

M/S DATA PATTERNS (INDIA) PVT. LTD.

DIL: 40(2007)

Dt. 11.9.2007

 

DESIGN, DEVELOPMENT & MANUFACTURE OF ELECTRONIC SYSTEMS FOR SHIPBORNE APPLICATIONS  & GROUND WEAPON SYSTEMS – BOTH STATIC AND MOBILE, SUCH AS FIRE CONTROL SYSTEMS, TORPEDO CONTROL SYSTEMS, SONAR SYSTEMS, DISPLAYS, COMPUTING SYSTEMS, TANK AND GUN ELECTRONICS INCLUDING UPGRADES. 

 

53

M/S BHARAT HEAVY ELECTRICALS LTD.,

DIL: 41(2007)

Dt. 11.9.2007

 

ALL TYPES OF GUNS INCLUDING FIELD GUNS, AIR DEFENCE GUNS, MORTARS FOR ARMY, NAVY, AIR FORCE AND PARAMILITARY FORCES.

 

54

M/S DATA PATTERNS (INDIA) PVT. LTD.

DIL: 42(2007)

Dt. 12.9.2007

 

DESIGN, DEVELOPMENT & MANUFACTURE OF ELECTRONIC SYSTEMS FOR UAVS, MISSILES, ARMAMENT SYSTEMS INCLUDING UPGRADES.

 

 

 

55

M/S BHARAT HEAVY ELECTRICALS LTD.,

DIL: 43(2007)

Dt. 12.9.2007

 

MANUFACTURE OF ARMOURED AND COMBAT VEHICLES INCLUDING ASSOCIATED SYSTEMS, SUBSYSTEMS, COMPONENTS SUCH AS TURRETS, TURRETS MOUNT THERMO PRESSED COMPONENT.

 

56

M/S BHARAT HEAVY ELECTRICALS LTD.,

DIL: 44(2007)

Dt. 12.9.2007

 

BRIDGE LAYING SYSTEMS ON COMBAT VEHICLES.

 

57

M/S BHARAT HEAVY ELECTRICALS LTD.,

DIL: 45(2007)

Dt. 12.9.2007

CONTROL SYSTEMS (ELECTRIC/HYDRAULIC) FOR ARMOURED/COMBAT VEHICLES/ASSOCIATED WEAPON SYSTEMS.

 

58

M/S BHARAT HEAVY ELECTRICALS LTD.,

DIL: 46(2007)

Dt. 12.9.2007

 

ALL TYPES OF WEAPON FIRE CONTROL SYSTEMS, AVIONICS, RADIO COMMUNICATION, ELECTRONIC WARFARE SYSTEMS, EARLY WARNING SYSTEM

 

59

M/S BHARAT HEAVY ELECTRICALS LTD.,

DIL: 47(2007)

Dt. 12.9.2007

 

ALL TYPES OF SIMULATORS, COMPUTER BASED TRAINERS FOR VEHICLES/PLATFORM, RADAR, WEAPONS, MISSILES ETC. FOR ALL DEFENCE FORCES AND PARA MILITARY FORCES

 

60

M/S BHARAT HEAVY ELECTRICALS LTD.,

DIL: 48(2007)

Dt. 12.9.2007

 

SHIP CONTROL SYSTEM INCLUDING INTEGRATED PLATFORM MANAGEMENT SYSTEMS (IPMS)

 

61

M/S BHARAT HEAVY ELECTRICALS LTD.,

DIL: 49(2007)

Dt. 12.9.2007

 

MANUFACTURE OF RADARS AND ASSOCIATED SYSTEMS

 

62

M/S SAMTEL DISPLAY LTD.

DIL: 51(2007)

Dt. 13.9.2007

 

  1. MULTI FUNCTION DISPLAYS
  2. LCD DISPLAYS
  3. HEAD UP DISPLAYS
  4. HELMET MOUNTED DISPLAYS
  5. OPTICAL MODULE
  6. BACK LIGHT
  7. ELECTRONIC MODULE
  8. OPTICAL MECHANICAL SENSORS
  9. INERTIAL NAVIGATION SYSTEMS
  10. MISSION COMPUTERS
  11. GYROS
  12. COLOR AVIONIC TUBES
  13. MONO AVIONICS TUBES
  14. SPARE PARTS FOR ALL THE ABOVE 10% OF THE REQUIREMENT OF ALL OF SL. NO. 1 TO 13
  15. REPAIR SERVICE & AMC.

 

63

M/S BHARAT HEAVY ELECTRICALS LTD.,

DIL: 54(2007)

Dt. 13.9.2007

 

PROPULSION SYSTEMS INCLUDING SHAFTING, A & P BRACKETS FOR SHIPS, SUBMARINES & PATROL RESEARCH VESSELS

 

64

M/S HBL ELTA AVIONICS SYSTEMS PVT. LTD.

DIL: 57(2007)

Dt. 14.9.2007

 

  1. RADARS & PARTS
  2. ELECTRONIC WARFARE SYSTEMS & ACCESSORIES/PARTS
  3. SURVEILLANCE SYSTEMS/ACCESSORIES & PARTS
  4. ELECTRONIC COMMUNICATION SYSTEMS
  5. INTEGRATED PLATFORMS BOTH MOBILE & STATIONARY

 

65

M/S MAGNUM AVIATION PVT. LTD.

DIL: 58(2007)

Dt. 20.9.2007

 

AIRCRAFT ENGINE, PARTS & ACCESSORIES FOR AIRCRAFT/SPACE AIRCRAFT

 

66

M/S HBL POWER SYSTEMS LTD.

DIL: 62(2007)

Dt. 9.10.2007

 

ELECTRONIC FUSES (EMPTY)

 

67

M/S TARA SYSTEMS AND TECHNOLOGIES LTD. (NOW M/S TATA ADVANCED SYSTEMS LIMITED)

DIL: 63(2007)

Dt. 10.10.2007

 

DESIGN, DEVELOPMENT, MANUFACTURE, ASSEMBLY/SYSTEM INTEGRATION OF STATE-OF-THE-ART NETWORK-CENTRIC WARFARE ENABLES, LIKE BATTLEFIELD TRANSPARENCIES DEVICES INCLUDING TACTICAL AND STRATEGIC COMMUNICATION SYSTEMS, BOTH SHORT AND LONG RANGE, DEVELOPMENT OF SPECIALIZED ANTENNAS AND MASTS, SENSORS, SOFTWARE DEFINED RADIO, GIMBALS PAYLOAD, SATELLITE/WIRELESS/LANDLINE OPTICAL COMMUNICATIONS SYSTEMS, OTHER COMPONENTS, SUB-SYSTEMS AND ASSOCIATED SYSTEMS. 

 

68

M/S TATA ADVANCED SYSTEMS LIMITED ( EARLIER TARA SYSTEMS AND TECHNOLOGIES LTD)

DIL: 64(2007)

Dt. 10.10.2007

 

DESIGN, DEVELOPMENT, MANUFACTURE, ASSEMBLY AND UPGRADES OF WEAPON SYSTEM-ROCKET AND MISSILE LAUNCHERS, FOR GROUND & NAVAL APPLICATIONS INCLUDING ASSOCIATED SYSTEMS AND SUB-SYSTEMS, INCLUDING INERTIAL AND OPS BASED NAVIGATION AND TRACKING SYSTEMS AS A LEAD SYSTEM INTEGRATOR. 

 

69

M/S TATA ADVANCED SYSTEMS LIMITED ( EARLIER TARA SYSTEMS AND TECHNOLOGIES LTD)

DIL: 65(2007)

Dt. 10.10.2007

 

DESIGN, DEVELOPMENT, MANUFACTURE, ASSEMBLY, RUGGEDIZATION AND UPGRADES OF MIL (MILITARY GRADE) PRODUCTS SUCH AS DISPLAY CONSOLES, RUGGED COMPUTERS, WORKSTATIONS SERVERS, ON BOARD COMPUTERS, GPS RECEIVERS, PRINTERS, DOCUMENTS/BIO-METRIC SECURITY SYSTEMS.

 

70

M/S TATA ADVANCED SYSTEMS LIMITED ( EARLIER TARA SYSTEMS AND TECHNOLOGIES LTD)

DIL: 66(2007)

Dt. 11.10.2007

 

DESIGN, DEVELOPMENT, MANUFACTURE, ASSEMBLY AND UPGRADES OF ELECTRONIC WARFARE SYSTEMS,       ( STAND-ALONE & INTEGRATED), EMI/EMC FOR ARMY, NAVY, AIR FORCE, PARA-MILITARY AND INLAND SECURITY, FOR BEING SYSTEM INTEGRATORS IN THE FIELD.

 

71

M/S TATA ADVANCED SYSTEMS LIMITED ( EARLIER TARA SYSTEMS AND TECHNOLOGIES LTD)

DIL: 67(2007)

Dt. 11.10.2007

 

DESIGN, DEVELOPMENT, MANUFACTURE, ASSEMBLY AND UPGRADES OF GROUND, NAVAL AND AIR COMBAT  SYSTEMS, AIR DEFENCE, ARTILLERY, COMMAND & CONTROL SYSTEMS, BORDER AND MARITIME SECURITY AND SURVEILLANCE, INCLUDING SENSORS SUCH AS RADARS, SONAR, THERMAL IMAGING, RADIOGRAPHY, OPTRONICS AND NIGHT VISION SUB-SYSTEM AND ASSOCIATED SYSTEMS.  

 

                                             

 

72

M/S TATA ADVANCED SYSTEMS LIMITED ( EARLIER TARA SYSTEMS AND TECHNOLOGIES LTD)

DIL: 68(2007)

Dt. 11.10.2007

 

DESIGN, DEVELOPMENT, MANUFACTURE, ASSEMBLY AND UPGRADES OF AIR DEFENCE GUNS, FIELD ARTILLERY, NAVAL GUNS, TANKS, COMBAT VEHICLES, ANTI-TANK WEAPONS SYSTEMS, MORTARS, SHELL, MISSILES, ROCKETS AND ANY ASSOCIATED SYSTEMS/SUB-SYSTEMS BUT NOT LIMITED TO TRAJECTORY CORRECTIONS SYSTEMS, GUIDED MUNITIONS/TORPEDOES.

 

73

M/S TATA ADVANCED SYSTEMS LIMITED ( EARLIER TARA SYSTEMS AND TECHNOLOGIES LTD)

DIL:69 (2007)

Dt. 11.10.2007

 

DESIGN, DEVELOPMENT, MANUFACTURE, ASSEMBLY AND UPGRADES OF AVIONICS, AIRBORNE ASSEMBLIES, SYSTEMS AND EQUIPMENT FOR AIRCRAFTS, DISPLAY SYSTEMS, HELICOPTERS & AWACS INCLUDING DEVELOPMENT OF UAVS(UNMANNED AERIAL VEHICLES) OF ALL TYPES AND FOR DEFENCE SPACE SYSTEMS/SUB-SYSTEMS AND AS A LEAD SYSTEM INTEGRATOR.

 

74

M/S VEM TECHNOLOGIES PVT. LTD.

DIL: 70(2007)

Dt. 30.10.2007

 

ASSEMBLY, INTEGRATION & CHECKOUT OF ARMS AND AMMUNITIONS (ROCKET AND MISSILES), HYDRAULICS, HIGH PRESSURE PNEUMATIC SYSTEMS AND THEIR SUBSYSTEMS, LAUNCH CONTROL & BATTLE MANAGEMENT SYSTEMS.

 

75

M/S SIGMA MICROSYSTEMS PVT. LTD.

DIL: 71(2007)

Dt. 27.11.2007

 

ELECTRONIC SYSTEM/SUB-SYSTEMS, INCLUDING EMBEDDED APPLICATION SOFTWARE.

 

76

M/S HBL POWER SYSTEMS LTD

DIL:72(2007)

Dt. 03.12.2007

1.      ELECTRONIC COMPONENTS INCLUDING MULTI-LAYER PCBS, HIGH VOLTAGE POWER SUPPLIES, DIGITAL SIGNAL PROCESSING MODULES FOR NAVIGATION, GUIDANCE, WEAPON CONTROL SYSTEMS/AVIONICS

2.      MACHINE PRESSED COMPONENTS AND SUB-SYSTEMS FOR SPECIALIZED ENCLOSURES & ASSEMBLIES TO BE INSTALLED  IN AIRBORNE, SHIPBORNE AND TERRESTRIAL PLATFORMS

3.      LOOMS AND CABLE HARNESSES FOR AIRBORNE, SHIPBORNE AND TERRESTRIAL PLATFORMS

 

77

M/S BHARAT ELECTRONICS LTD.

DIL : 1(2008)

Dt. 15.2.2008

SHIP-BORNE COMINT/WIDE BAND DIRECTION FINDING(WBDF) & ACQUISITION SYSTEM IN 20-1250 MHZ FREQUENCY RANGE [ELTA TYPE NO. EL/K-7036N-WBDF) FOR TO INDIAN NAVY.

 

78

M/S HINDUSTAN AERONAUTICS LIMITED

DIL : 2(2008)

Dt. 15.2.2008.

 

TEN TYPES OF CUSTOM MEMORY MODULE

TWELVE TYPES OF APPLICATION SPECIFIC MODULES

20W,30W,40W & 60W DC-DC CONVERTERS

CCD CAMERAS

 

79

M/S HIGH ENERGY  BATTERIES (INDIA) LIMITED

DIL NO. 3(2008)

Dt. 15.2.2008

 

  1. SILVER ZINC BATTERIES
  2. NICKEL CADMIUM BATTERIES

 

80

M/S SEC INDUSTRIES PVT. LTD.,

DIL : 4(2008)

Dt. 18.2.2008.

 

RIVETED & WELDED AIRFRAME SECTIONS SUCH AS NOSE CONES, SPACE FRAMES, STIFFENED CYLINDRICAL SECTIONS, WINGS & FINS, CONTROL SURFACE MECHANISM ETC.

 

81

M/S RADIANT CABLES PVT. LTD.

DIL NO. 6(2008)

Dt. 18.2.2008.

 

ELECTRIC & ELECTRONICS WIRES AND CABLES AND CABLE ASSEMBLIES & EXTRUDED COPPER/ALLOY PRODUCTS SPECIAL ELECTRIC AND ELECTRONIC EQUIPMENT WIRE AN CABLES, CABLE SYSTEMS, CONTROL SYSTEMS, COMPONENTS. 

 

82

M/S SEC INDUSTRIES PRIVATE LIMITED.

DIL : 7(2008)

Dt. 19.2.2008.

 

MISSILE SYSTEMS INTEGRATION (INVOLVING MISSILE ELECTRONICS, ELECTRICALS, EXPLOSIVES, PYRO-DEVICES, HYDRAULICS, PNEUMATICS & OTHER ELECTRO MECHANICAL SYSTEMS) & CHECK OUT FOR ALL VARIETIES OF MISSILES, VIZ., ANTI-TANK, SURFACE TO AIR TO AIR MISSILES.

 

 

83

M/S MAHINDRA & MAHINDRA LTD.

CIL: 10(2008)

Dt. 19.9.2008

DEVELOPMENT AND FABRICATION OF MOBILE SURVEILLANCE SYSTEMS

 

84

M/S MAHINDRA & MAHINDRA LTD.

CIL:11(2008)

Dt.19.09.2008

LIGHT ARMOURED MULTI ROLE VEHICLE/ HIGH MOBILITY LIGHT MILITARY VEHICLES

 

 

 

85

M/S HCL INFOSYSTEMS LTD., 

DIL : 8(2008)

Dt. 19.2.2008.

 

DESIGN, DEVELOPMENT, MANUFACTURE, ASSEMBLY UPGRADES AND SYSTEM INTEGRATION OF AIR BORNE & GROUND BASED ELECTRONIC SYSTEMS FOR DEFENCE APPLICATIONS

 

86

M/S GODREJ  & BOYCE MFG. CO. LTD.,

DIL :24(2008)

Dt. 26.3.2008

 

ROCKET ENGINE/MAJOR SUB-ASSEMBLIES

 

87

M/S SM PULP PACKAGING PVT. LTD.,

DIL 38(2008)

Dt. 31.3.2008

  1. BULLET PROOF VEST/JACKET
  2. VEHICLE ARMOUR
  3. AIRCRAFT/HELICOPTER ARMOUR

 

88

M/S DEFSYS SOLUTIONS PVT. LTD.,

DIL:41 (2008)

Dt. 31.3.2008

 

DEVELOPMENT, INTEGRATION & MANUFACTURE OF AVIONICS/DEFENCE ELECTRONIC EQUIPMENT..

 

89

M/S GODREJ & BOYCE MFG. CO, LTD., 

DIL 42 (2008)

Dt. 31.3.2008

 

MISSILE LAUNCHERS

TORPEDO LAUNCHERS

 

90

M/S MICRON INSTRUMENTS PVT. LTD.,

DIL 43 (2008)

Dt. 31.3.2008

 

  1. EMPTY FUZES FOR ARTILLERY, SHELLS, MORTAR BOMBS, GRENADES AND SIMILAR MUNITIONS OF WAR
  2. SAFETY AND ARMING DEVICES FOR FUZES
  3. CLOCK WORK MECHANISM AND GEAR TRAIN ASSEMBLIES

 

91

M/S VERDANT TELEMETRY 

DIL 44 (2008)

Dt. 31.3.2008

 

AIRBORNE ANTENNAS RADOMES, COMPOSITE COMPONENTS, TELEMETRY TRANSCEIVERS

 

92

M/S VECTRA ENGG..  PVT. LTD., 

DIL: 52 (2008)

Dt. 8.4.2008

 

DESIGN, DEVELOPMENT, INTEGRATION & MANUFACTURE OF AIR BORNE ASSEMBLIES & GROUND BASED EQUIPMENT FOR AIR-CRAFT & HELICOPTER

 

93

M/S VECTRA ENGG. MATERIALS PVT. LTD., 

DIL: 53 (2008)

Dt. 7.4.2008

 

OPTICAL GOODS & EQUIPMENT/OPTICAL INSTRUMENTS VIZ. NIGHT VISION BINOCULARS, MONOCULAR NIGHT VISION DEVICES, REFLEX SIGHTS AIMING DEVICES THERMAL IMAGING  SIGHTS FOR AMR & PASSIVE NIGHT SIGHTS FOR SMALL ARMS

 

94

M/S MELTRONICS SYSTEMTECH  PVT. LTD., 

DIL: 54 (2008)

Dt. 9.4.2008

ELECTRONICS SYSTEMS (HIGH-END AUTOMATED TEST EQUIPMENT, DATA COMMUNICATION SYSTEMS, SPECIAL TYPE SUB-SYSTEMS LEVEL TESTERS AND SUPPORT PACKAGES FOR DEFENCE-ELECTRONIC SYSTEMS, STRATEGIC ELECTRONICS ITEMS(ELECTRONIC WARFARE SUB-SYSTEMS/SUPPORT PACKAGES/UPGRADES, COMMUNICATION EQUIPMENT/SYSTEMS, RADAR UNITS, SIGNAL PROCESSING UNITS, DIGITAL RECEIVERS), ELECTRONIC SIMULATORS (HIGH-END SIMULATORS, EMULATORS PROGRAMMABLE TARGET GENERATORS AND PROFILE GENERATORS FOR DEFENCE SENSORS/WEAPONS) AND ELECTRONIC TESTERS(HIGH-END SPECIAL-TO-TYPE TEST JIGS AND EQUIPMENT)

 

95

M/S ALLIGATOR DESIGN   PVT. LTD., 

DIL 55 (2008)

Dt. 9.4.2008

MILITARY QUALIFIED RIFLE SIGHT

 

96

M/S  INFRA POLYTEC

DIL: 63(2008)

Dt. 1.7.2008

 

PARTS & ACCESSORIES FOR AIR CRAFTS

A. LCA

FIN, RUDDER, WING, FAIRINGS, COVERS, DOORS, FLOOR BOARD & SHROUD ETC FOR 10 AIR CRAFTS ETC.

B. ALH

MAIN ROTOR BLADES, TAIL ROTOR BLADES, FUSELAGE SHELL, FAIRINGS, DOORS, FLOORS BOARD & HATCH COVERS ETC FOR 15 ALH

C. SARAS AIRCRAFT

WING, HORIZONTAL STABILIZER INCLUDING ELEVATOR, VERTICAL STABILIZER INCLUDING RUDDER, PRESSURE

BULK HEAD, FRONT FUSELAGE TOP SKIN, BELLY FAIRINGS, FLOOR BOARD FLAPS & AILERONS FOR 10 AIRCRAFTS.

D. SHELLS COMPONENTS OF MISSILES

  1. SHELL BODY FOR 51MM SHELL
  2. SHELL BODY FOR 81MM SHELL
  3. SHELL BODY FOR 105MM SHELL
  4. SHELL BODY FOR 125MM SHELL
  5. SHELL BODY FOR 155MM SHELL
  6. FINS & STABILIZERS FOR 125MM SHELL
  7. FINS FOR PINAKA & OTHER MISSILES
  8. OTHER METAL COMPONENTS FOR MISSILES 

 

97

M/S SAMTEL HAL DISPLAY SYSTEMS PVT. LTD.,

DIL: 64(2008)

Dt. 2.7.2008

 

1.      MULTI FUNCTION DISPLAYS

2.      HEAD UP DISPLAYS

3.      HELMET MOUNTED DISPLAYS

4.      LCD DISPLAYS

5.      OPTICAL DISPLAYS

6.      BACK LIGHTS

7.      ELECTRONIC MODULES

8.      PLASMA DISPLAYS

9.      INERTIAL NAVIGATION SYSTEMS

10.  MISSION COMPUTERS

11.  GYROS

 

98

M/S ROLTA INDIA LIMITED

DIL 65(2008)

Dt. 2.7.2008.

DESIGN, DEVELOPMENT, MANUFACTURE, CUSTOMISE, ASSEMBLY, SYSTEM INTEGRATION, FABRICATE, CONSTRUCT, REPAIR, RECONDITION AND UPGRADES OF MARITME EQUIPMENT

              I.      SONAR SYSTEMS AND ASSOCIATED SUB-SYSTEM

           II.      NAVIGATIONAL, ULTRASONIC SOUNDING, METEOROLOGICAL, GEO-PHYSICAL INSTRUMENTS AND AUTOMATIC PILOTS

         III.      OCEANOGRAPHIC/HYDROLOGICAL INSTRUMENTS & SEISMOMETERS

        IV.      MARITIME RADARS, TARGETING RADARS INCLUDING COMBAT MANAGEMENT AND FIRE CONTROL SYSTEMS AND ASSOCIATED SYSTEMS

           V.      MARITIME SECURITY SYSTEMS

 

 

99

M/S ROLTA INDIA LIMITED

DIL 66(2008)

Dt. 2.7.2008.

DESIGN, DEVELOPMENT, MANUFACTURE, CUSTOMISE ASSEMBLY, SYSTEM INTEGRATION, FABRICATE, CONSTRUCT, REPAIR, RECONDITION AND UPGRADE OF COMMUNICATION SYSTEMS:

              I.      TACTICAL AND STRATEGIC COMMUNICATIONS SYSTEMS

           II.      RADIOS INCLUDING SOFTWARE DEFINED RADIOS

         III.      SATELLITE WIRELESS, OPTICAL COMMUNICATION SYSTEMS, THEIR COMPONENTS, SUB-SYSTEMS AND ASSOCIATED SUB-SYSTEMS 

 

 

100

M/S ROLTA INDIA LIMITED

DIL: 67(2008)

Dt. 2.7.2008.

DESIGN, DEVELOPMENT, MANUFACTURE, CUSTOMISE, ASSEMBLY, SYSTEM INTEGRATION, FABRICATE, CONSTRUCT, REPAIR, RECONDITION AND UPGRADES OF AERO SYSTEMS

              I.      GROUND CONTROL STATIONS

           II.      RADARS AND ASSOCIATED SYSTEMS WITH IFF TRANSPONDERS AND INTERROGATORS

         III.      AVIONICS SYSTEMS

        IV.      ON-BOARD FLIGHT SAFETY & CONTROL SYSTEMS

 

 

 

101

M/S ROLTA INDIA LIMITED

DIL 68(2008)

Dt. 2.7.2008.

DESIGN, DEVELOPMENT, MANUFACTURE, CUSTOMISE, ASSEMBLY, SYSTEM INTEGRATION FABRICATE, CONSTRUCT, REPAIR, RECONDITION AND UPGRADES OF ELECTRONIC WARFARE SYSTEMS

              I.      ELINT & COMINT SYSTEMS INCLUDING RECEIVERS, DF AND JAMMING STATIONS

           II.      SPECIALIZED HARDWARE FOR MONITORING AND SECURITY SYSTEMS

 

 

102

M/S ROLTA INDIA LIMITED 

DIL 69(2008)

Dt. 2.7.20 08.

DESIGN, DEVELOPMENT, MANUFACTURE, CUSTOMISE, ASSEMBLY, SYSTEM INTEGRATION, FABRICATE, CONSTRUCT, REPAIR, RECONDITION AND UPGRADE OF SENSORS OF ALL TYPES INCLUDING OPTO-ELECTRONIC ITEMS

              I.      NIGHT VISION DEVICES INCLUDING THERMAL IMAGERS, IMAGE INTENSIFIERS AND OTHER SENSORS USING SEISMIC, MAGNETIC, SECOTEC AND PASSIVE INFRA RED TECHNOLOGIES

           II.      BATTLE FIELD SURVEILLANCE RADARS

         III.      RANGE FINDERS, PHOTOGRAPHIC, CINEMATOGRAPHIC, OPTICAL GOODS, EQUIPMENT AND CAMERAS OF ALL TYPES

 

 

103

M/S AIRBORNE COMPONENTS REPAIRS & SERVICES PVT. LTD.,

DIL: 70(2008)

Dt. 2.7.2008

 

AIRCRAFT AND AERO ENGINE PARTS AND ACCESSORIES & AVIONICS COMPONENTS.

 

104

M/S JISNU COMMUNICATIONS  LTD.,

 DIL: 71(2008)

Dt. 2.7.2008.

 

  1. TRACKING & TELEMETRY SYSTEM FOR MOVING OBJECT TRACKING APPLICATION LIKE SATELITE UAV MISSILES ETC.
  2. VSAT COMMUNICATION SYSTEM
  3. BOARD TELEMETRY SYSTEMS

 

105

M/S ELECTRONICS CORPORATION OF INDIA LIMITED(ECIL)

DIL:74(2008)

Dt. 3.7.2008.

 

a.       RADIO COMMUNICATION SYSTEMS COVERING HF THROUGH MICROWAVE RANGES FOR GROUND AIR AND NAVAL APPLICATIONS

b.      COMINT SYSTEMS INCLUDING SEARCH, INTERCEPT MONITOR, DIRECTION FINDING ANALYZE, DECODE IN H/F;VHF, UHF, MICROWAVE RANGES

c.       ELECTRONIC WARFARE SYSTEMS IN AEROSTAT PLATFORMS

d.      ACTIVE RADAR SEEKERS

e.       TRACKING & MOBILE STATION ANTENNAE

f.       L,S,C,X,KU,KA BAND ANTENNAE

g.       SECURITY JAMMERS FOR PERSONNEL AND INSTALLATIONS

h.      ENCRYPTION PRODUCTS

i.        MISSILE SUPPORT SYSTEMS & C 4 I SYSTEMS

j.        SIMULATORS

k.      SOLID STATE COCKPIT VOICE RECORDER

l.        ACTUATORS FOR AIRBORNE APPLICATION

m.    SENSOR PACKAGES NAVAL APLICAITON

n.      RATE GYROS FOR DEFENCE APPLICATIONS

o.      SYNCHROS FOR DEFENCE APPLICATIONS

p.      JOYSTICKS (CONTROL LOCAL POWER) FOR DEFENCE APPLICATION

q.      ELECTRICAL TRIGGERS FOR DEFENCE APPLICATIONS

r.        GYRO STABILIZED HORIZONTAL ROLL BAR FOR NAVAL APPLICATIONS

s.       ANTENNA STABILIZATION PLATFORM FOR X BAND AIRBORNE RADARS

 

 

106

M/S SEC INDUSTRIES PVT LTD.,

DIL:75(2008)

Dt. 14.8.2008.

STATIC & MOBILE LAUNCHERS FOR AIR LAUNCH MISSILES (SHORT, MEDIUM & LONE RANGE), ROCKETS, BOMBS & AMMUNITIONS AND PTAS BOTH LAND & SHIP BASED INCLUDING THEIR SUB-SYSTEMS & UPGRADES

 

107

M/S LARSON & TOUBRO LTD.,

DIL:76(2008)

Dt. 14.8.2008.

 

(A) PARTS FOR AIRCRAFT

 (B) OTHER METAL PRODUCTS (PARTS FOR RADARS)

 

108

M/S SIKA INTERPLANT LTD.,

DIL:77(2008)

Dt. 14.8.2008.

 

AEROSPACE COMPONENTS & STANDARD PARTS INCLUDING FASTNERS AS PER AERO/MIL SPECIFICATIONS

              I.      SUB-SYSTEM & SYSTEMS

           II.      AERO SPACE COMPONENTS

         III.      STANDARD PARTS

 

109

M/S AVANTAL SOFTECH  LTD.,

DIL:78(2008)

Dt. 14.8.2008.

 

1.ECM EQUIPMENT & JAMMERS OF EW SYSTEMS

2. COMINT SYSTEM SUB-SYSTEMS

3.SATCOM EQUIPMENT

4. RADAR SUB-SYSTEMS

 

110

M/S ICOMM TELE LTD.,

DIL:79(2008)

Dt. 14.8.2008.

DESIGN, DEVELOPMENT AND MANUFACTURE, INSTALLATION, COMMISSIONING OF FIXED FREQUENCY AND FREQUENCY HOPPING GROUND TO GROUND AND GROUND TO AIR, POINT TO POINT AND POINT TO MULTI-POINT RADIOS AND RADIO RELAYS FOR DEFENCE STATIC AND NON-STATIC MOBILE COMMUNICATIONS, RADIOS(OF VARIOUS TYPES) AND SATCOM’S CONTROL HARNESS.   <